Panasonic KX-T336 System Reference Manual page 728

D. Outgoing Call Features
1.00 Making Outside Calls
1.01 Local Trunk Dial Access
Description
Allows the attendant to make outgoing CO calls
using automatically selected idle CO line by
dialing the feature number for "ARS/Local CO
Line Access."
To activate this feature, set "System-
Operation",Automatic Route Selection to "No." If
set to "Yes," ARS feature is activated instead of
this feature.
Refer to Section 3-C-2.00 "Automatic Route
Selection (ARS)" for further information.
Programming
System Programming
"System-Operation (1/3)",
Automatic Route Selection
"System-Local Access Group",
Hunt Sequence
"System-Numbering Plan
(02/11)",
ARS/Local CO Line Access
Conditions
An idle CO line available and hunting sequence
is determined by the system programming
"System-Local Access Group", Hunt Sequence.
If busy tone is heard, there is no idle CO line
available.
If tenant service is employed, accessible trunk
group is limited to the trunk groups within the
same tenant.
( for U.S.A. and Canada only)
The dialing plan followed is that of the trunk
group in hunt sequence 01 in "System-Local
Access Group."
Reference
VT Dumb
9-D-1.01 10-C-4.00
9-D-5.00 10-C-9.00
9-D-6.02 10-C-10.00
6-D-1
(70695)
Operation
Dial tone sounds.
(For instance, an idle LOOP key is pressed and
the SRC indicator is lit and dial tone sounds.)
1. Dial the feature number for
ARS/Local CO Line Access "9"
(default).
• You hear dial tone.
2. Dial the telephone number of the
outside party.