Panasonic KX-T336 System Reference Manual page 620

1.03 Unscreened Call Transfer to
Remote
Description
Allows an extension user to transfer a call to the
remote maintenance resource. (Available with
Software Version 9.5X and above). Modem
answer tone is returned instantly, if it is not in use.
This operation allows System Administrator to
perform System Administration from Remote
Location.
Refer to Section 14-B-2.00 "System
Administration from a Remote Location" for
further information.
To transfer a call to remote maintenance
resource, "FDN for Remote" is used, which is
assigned in "System-Operation", Remote
Directory Number.
See Section 3-B-3.00 "Floating Directory Number
(FDN)" for details of FDN.
Programming
System Programming
"System-Operation (2/3)",
Remote Directory Number
"World Select 3 (WS3)"
SLT Transfer Operation
Conditions
If Music on Hold is assigned, the system sends
Music on Hold to the transferred party during the
transferring operation. For details, refer to
Section 3-E-1.00 "Music on Hold."
If the remote maintenance port is in use, busy
tone is returned to the held party. Automatic
Callback does not function in this case, so the
caller should call again when it becomes idle.
Operation -1 (Mode 1)
While having a conversation;
1. Press the switchhook for
approximately one half second
and release it.
• The other party is placed on
Consultation Hold.
• You hear confirmation tone 2,
then dial tone 1 or 3 or 4.
Reference
VT Dumb
9-D-1.02 10-C-4.00
— 10-C-53.00
5-D-3
(70695)
2. Dial the "FDN for Remote": three
or four digits.
• You hear confirmation tone 3,
then dial tone 1 or 3 or 4.
• If the remote maintenance port
is not in use, the held party
hears answer tone and can
start communication instantly.
3. Replace the handset.
Operation -2 (Mode 2)
While having a conversation;
1. Press the switchhook for
approximately one half second
and release it.
• The other party is placed on
Consultation Hold.
• You hear confirmation tone 3,
then dial tone 1 or 3 or 4.
2. Dial the feature number for
Transfer "58" (Default).
• You hear confirmation tone 2
and then dial tone.
3. Dial the "FDN for Remote": three
or four digits.
• You hear confirmation tone
3,then dial tone 1 or 3 or 4.
• If the remote maintenance port
is not in use, the held party
hears answer tone and can
start communication instantly.
4. Replace the handset.