Panasonic KX-T336 System Reference Manual page 782

2.00 Account Code Entry
Description
When placing an outgoing call or during a
conversation, account codes can be recorded on
the SMDR (Station Message Detail Recording)
by entering an account code (up to 10 digits) for
accounting and billing purposes.
Assigning the ACCOUNT key to a programmable
key must be done by Attendant Management
screen.
Programming
Attendant Management
ACCOUNT key
Conditions
You can enter an account code during or after a
call before hanging up.
Only numbers 0 through 9 can be entered as an
account code.
Entering 11 or more digits as an account code
without the delimiter is invalid and causes alarm
tone.
Enter "#" as the delimiter to conclude an account
code.
Operation
Entering an account code when calling an outside
party.
LOOP
Reference
ACCOUNT
6-C-10.00
(Supplement)
To correct input errors in step 4, enter an account
code again after pressing "* ."
6-J-6
1. Press an idle LOOP key.
• The SRC indicator lights, dial
tone sounds .
2. Dial the feature number for
"ARS/Local CO Line Access."
• Dial tone 2 sounds.
3. Press the ACCOUNT key
(programmable key).
• Dial tone sounds.
• The following message appears
on the message line in I/O field:
Message: Enter account code
4. Dial an account code (0 through
9, up to 10 digits).
• The account code appears on
the message line in I/O field.
5. Dial "#."
• The account code is stored.
• The message on the
Input/Output field disappears,
and dial tone sounds .
6. Dial the telephone number of the
outside party.