Calling Technology Functions; Additional Functions In The Input Screens; Checking Cycle Parameters - Siemens SINUMERIK 840D sl Operating Manual

Creating a ShopTurn program

9.15 Calling technology functions

9.15 Calling technology functions
9.15.1

Additional functions in the input screens

Selection of units
Display of abs or inc
The abbreviations "abs" and "inc" for absolute and incremental values are displayed behind
the entry fields when a switchover is possible for the field.
Help screens
2D and 3D graphics or sectional views are displayed for the parameterization of the cycles.
Online help
If you wish to obtain more detailed information about certain G code commands or cycle
parameters, then you can call a context-sensitive online help.
9.15.2

Checking cycle parameters

The entered parameters are already checked during the program creation in order to avoid
faulty entries.
If a parameter is assigned an illegal value, this is indicated in the input screen as follows:
● The entry field is displayed with a colored background (orange).
● The comment line displays a note.
● If the parameter entry field is selected with the cursor, the note is also displayed as a tool
tip.
266
⇒ A menu tree with all of the available measuring variants of the measuring
cycle function "Measure workpiece" can be found in the following reference:
Programming Manual Measuring cycles / SINUMERIK 840D sl/828D
⇒ A menu tree with all of the available measuring variants of the measuring
cycle function "Measure tool" can be found in the following reference:
Programming Manual Measuring cycles / SINUMERIK 840D sl/828D
If, for example, the unit can be switched in a field, this is highlighted as soon as the cursor
is positioned on the element. In this way, the operator recognizes the dependency.
The selection symbol is also displayed in the tooltip.
Operating Manual, 05/2017, A5E40868721
Turning