Install A Raid Super Capacitor Module; Air Baffle Replacement - Lenovo ThinkSystem SR650 Maintenance Manual

Step 2. Remove the RAID super capacitor module from the air baffle.
If you are instructed to return the old RAID super capacitor module, follow all packaging instructions and use
any packaging materials that are provided.

Install a RAID super capacitor module

Use this information to install a RAID super capacitor module.
Before installing a RAID super capacitor module:
1. Touch the static-protective package that contains the new RAID super capacitor module to any
unpainted surface on the outside of the server. Then, take the new RAID super capacitor module out of
the package and place it on a static-protective surface.
2. Locate the holder for the RAID super capacitor module on the air baffle and note the orientation of the
RAID super capacitor module.
To install a RAID super capacitor module, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
• Youku:
http://list.youku.com/albumlist/show/id_50483444
Figure 75. RAID super capacitor module installation
Step 1. Gently press and hold the tab on the air baffle as shown.
Step 2. Insert the RAID super capacitor module into the holder on the air baffle.
Step 3. Press down the RAID super capacitor module to install it into the holder.
After installing the RAID super capacitor module:
1. Connect the RAID super capacitor module to a RAID adapter with the extension cable that comes with
the RAID super capacitor module.
2. Complete the parts replacement. See "Complete the parts replacement" on page 203.

Air baffle replacement

Use this information to remove and install the air baffle.
S033
.
Chapter 3 Hardware replacement procedures
107