Install A Riser Card - Lenovo ThinkSystem SR650 Maintenance Manual

If you are instructed to return the old riser card, follow all packaging instructions and use any packaging
materials that are provided.

Install a riser card

Use this information to install a riser card.
Before installing a riser card, touch the static-protective package that contains the new riser card to any
unpainted surface on the outside of the server. Then, take the new riser card out of the package and place it
on a static-protective surface.
To install a riser card, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
• Youku:
http://list.youku.com/albumlist/show/id_50483444
Step 1. Align the holes in the riser card with the mounting studs on the bracket. Then, install the riser card
to the bracket in the direction as shown. Ensure that the screw holes in the riser card align with the
corresponding holes in the bracket.
Figure 110. Riser card installation
Step 2. Install the two screws to secure the riser card to the bracket.
148
ThinkSystem SR650 Maintenance Manual