Moving The Print Head - Epson SC-F9300 series User Manual

SC-F9300 Series User's Guide
A
Put the cup supplied with the ink cleaner on
the metal tray, and pour approximately 10 ml
of ink cleaner into the cup.
B
Dampen the cleaning stick with ink cleaner.
Do not allow ink cleaner to drip from the
cleaning stick.
When dampening a clean-room wiper with ink
cleaner, use ink cleaner poured into a cup.
c
Important:
❏ Do not use ink cleaner that you have
used for cleaning to clean the next time.
Using dirty ink cleaner will make
staining worse.
❏ Tightly close the lid of the ink cleaner
and store it at room temperature out of
direct sunlight and away from high
temperatures or humidity.
❏ Used ink cleaner, cleaning stick, and
clean-room wipers are industrial waste.
Dispose of them in the same way as for
waste inks.
"Disposal of used consumables" on
U
page 80

Moving the Print Head

This section describes how to move to cleaning
position of the print head.
Maintenance
c
Important:
Be sure to follow the steps below when positioning
the print head. Moving the print head manually
could cause malfunction.
Buttons that are used in the following settings
A
Confirm that the status screen shown below is
displayed, and then press the # button.
The Maintenance menu will be displayed.
B
Use the d/u buttons to select Head
Maintenance and press the Z button.
C
Press the d/u buttons to select Regular
Cleaning, and then press the Z button two
times.
The print head moves to the cleaning position.
61