Canon CLC5151 Reference Manual page 228

1
2
3
4
4-48
Specifying Common Settings
Press [Common Settings]
Press [On] [Store].
If you press [Off], proceed to step 5.
Select the desired paper size.
If you want to select a standard paper size:
Select the desired paper size
NOTE
To select an inch paper size, press [Inch-size].
If you want to select an irregular paper size:
Press [Irreg. Size].
Enter the size of the paper using the numeric keys on the touch panel display.
Press [X] enter a value.
Press [Y] enter a value.
Press [OK].
You can also select a size key ([S1] to [S5]) containing a stored paper size setting, instead of
entering values.
NOTE
• To enter values in inches, press [Inch].
• For instructions on entering values in inches, see "Values in Inches," on p. 2-28.
• If you make a mistake when entering values, press [C] on the touch panel display
correct values.
• To select a registered paper size stored in a size key ([S1] to [S5]), you must store the irregular
paper size in the size key beforehand. For instructions on storing irregular paper sizes, see
"Irregular Paper Size Settings for the Stack Bypass," on p. 4-49.
Press [Next].
[Stack Bypass Standard Settings].
press [Next].
enter the