2
2
Values in Inches
If you want to enter values in inches in all modes which require a numeric entry, set Inch Entry
to 'On' in Common Settings (from the Additional Functions screen). (See "Inch Entry," on
p. 4-31.) This enables you to enter values in inches when you press [Inch] on a screen requiring
a numeric entry or measurement.
The following example shows you how to enter 1 1/2" for Original Size in the Zoom Program
mode.
1
2-28
Entering Characters from the Touch Panel Display
NOTE
• If you make a mistake when entering characters, press [
press [Backspace] to delete the characters
• To delete all of the characters you have entered, press
• The available entry modes, and the maximum number of characters that you can enter vary,
depending on the type of entries you are making.
When you have entered all characters, press [OK].
Press [1]
[_]
[1]
panel display.
NOTE
• If you make a mistake when entering values, press [C] on the touch panel display
correct values.
• You can enter only 2, 4, 8, or 16 as the denominator.
• The value entered in inches is converted to millimetres by the machine each time it is entered.
Thus, there may be a slight difference between the value calculated and the actual value
entered.
• To enter values in millimetres, press [mm].
enter the correct characters.
.
[/]
[2] using the numeric keys on the touch
] or [
] to position the cursor
enter the