USB Settings
This mode enables you to specify the USB settings.
NOTE
Changes are only effective after you restart the machine (the main power switch is turned OFF, and then
back ON). For instruction on restarting (turning the main power switch OFF and then ON) the machine,
see "Main Power and Control Panel Power, " on p. 1-16.
Using a USB Device
Set Use USB Device to 'On' to connect a computer with the machine via the USB port.
1
6
2
Using a USB Host
Set Use USB Host to 'On' to connect a host device with the machine via the USB port.
1
2
6-40
USB Settings
Press
[System Settings]
Select [On] or [Off]
Press
[System Settings]
Select [On] or [Off]
[USB Settings]
press [OK].
[USB Settings]
press [OK].
[Use USB Device].
[Use USB Host].