Saddle Stitch Position Adjustment - Canon CLC5151 Reference Manual

IMPORTANT
• Only use A3 or A4R paper for the saddle stitch staple repositioning procedure.
• Make sure to remove all output booklets from the optional Booklet Tray before performing the saddle
stitch staple repositioning procedure.
NOTE
• Saddle stitch staple repositioning can be performed only if the optional Saddle Finisher-W2 is attached.
• Paper that is required for the saddle stitch staple repositioning procedure is automatically fed to the
saddle stitcher unit by the machine.
1
Press
Repositioning].
2
Press [Start].

Saddle Stitch Position Adjustment

If you are using the Saddle Stitch mode of the optional Saddle Finisher-W2, and you notice that
the folds of the paper are not exactly in the middle of the booklet, you can make adjustments to
the saddle stitch position to compensate for this error.
NOTE
The saddle stitch position can only be adjusted if the optional Saddle Finisher-W2 is attached.
1
Press
Adjustment].
2
Select the paper size for which you want to adjust the saddle stitch
position.
NOTE
Some of the paper sizes displayed may not be available in certain countries.
[Adjustment/Cleaning]
[Adjustment/Cleaning]
[Saddle Stitcher Staple
[Saddle Stitch Position
Adjusting the Machine
4
4-67