Canon CLC5151 Reference Manual page 319

To automatically search for destinations:
Press [Auto Search/Register].
Press [Auto Search Start].
Press [-] or [+] to set the search depth (how many routers to search).
NOTE
• Since searching uses SLP (Service Location Protocol), machines behind a router will not be
detected if the router is set to restrict passing with the SLP protocol.
• If any of the following is true for the destination machine, you cannot search the destination.
- The main power is turned OFF
- The destination machine is not connected to the network
- Every function in Receive Restriction for Each Function under <Receiving Settings> in Device
Information Delivery Settings is set to 'On'
Select the destination
To select all of the destinations, press [Select All]. However, if a destination is selected, this
key changes to [Clear Selection].
NOTE
• You can cancel a selection by selecting the destination again.
• To cancel all destinations, press [Clear Selection]. ([Clear Selection] changes to [Select All].)
3
Press [Done].
press [OK].
Specifying Device Information Delivery Settings
6
6-45