DBS3900 (ICR)
Installation Guide
Issue 12 (2015-04-30)
Figure 15-24 Stripping the jacket off the power cable
b.
Wrap the copper sheet of the ground clip around the shield layer of the power
cable, and use cable ties to bind them tightly. Then trim off surplus part from the
heads of the cable ties without leaving any sharp edge.
Figure 15-25 Wrapping and tying the copper sheet of the ground clip
(1) Hole for a cable tie (12AWG/4 mm
2
in.
)
c.
Wrap three layers of waterproof tape and three layers of insulation tape around
the ground clip.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
or 0.006
(2) Hole for a cable tie (≥ 6 mm
2
in.
)
15 Installing Cables
2
or 0.009
133