ABB i-bus KNX Product Manual page 132


ABB i-bus KNX
Commissioning
No.
13
This communication object is enabled if in
brightness value of the DALI output is set with the option yes: via object "Brightness value/status".
This communication object has the same functions and properties as the communication object Brightness value. The
status is additionally fed back.
The parameterization is implemented in the parameter window Status - Central.
Telegram value:
14
This communication object is enabled if in
brightness value of the DALI output is set with the option yes: via separate object "Brightness value/status".
Telegram value:
This communication object reports the current brightness value of the DALI device. The value of the communication object
updates itself during a dimming process, scene or staircase lighting time curve.
It is possible to parameterize if the status is sent on after a change and/or after request.
130 2CDC507128D0202 | DLR/A 4.8.1.1
Function
Brightness value/status
0 = OFF, or minimum dimming threshold
...
255 = 100 %
Note
If several groups are assigned to the communication object Brightness value/status, the status address
should be set as the sending address. In a KNX group with several status messages, it is useful to allow
just a single group member to feedback the status.
Status brightness value
0 = OFF
...
255 = 100 %, max. brightness value
Object name
DALI output
Parameter window Status - Central, page 57, the parameter Status response of
DALI output
Parameter window Status - Central, page 57, the parameter Status response of
Data type Flags
1 byte C, R, W, T
DPT 5.001
1 byte C, R, T
DPT 5.001