Parameter Window - Gx Light Controller - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.2.3.2.5

Parameter window - Gx Light controller

In this parameter window, the settings for the lighting control are undertaken.
With the additional function Light controller, a constant lighting control is possible in principle with any KNX
lighting components. In the simplest case it can be the lighting groups in the DLR/A. However, with the
function master/slave there is an additional method to integrate other ABB i-bus
switching/dimming actuators, into the lighting control.
A more detailed description of a lighting control as well as a detailed description of the terminology, e.g.
such as sensor value, setpoint, actual value etc., can be found under
The parameter window -Gx Light controller is visible when in
additional function Light controller is parameterized for the lighting goup. The additional function light
controller is only available for the first 4 lighting groups of the DLR/A. Lighting groups 5...8 can be
integrated into the control by a master/slave assignment.
®
KNX devices, e.g.
Constant lighting control, page 167.
Parameter window Gx Group, page 63, the
DLR/A 4.8.1.1 | 2CDC507128D0202 95