Parameter Window - Gx Light Controller - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.2.3.2.5

Parameter window - Gx Light controller

In this parameter window, the settings for the lighting control are undertaken.
With the additional function Light controller, constant light control is possible in principle with any KNX
lighting components. In the simplest case, it can be the lighting groups in the DLR/S. However, with the
master/slave function, there is an additional method for integrating other ABB i-bus
switching/dimming actuators, into the light controller.
A more detailed description of a light controller as well as a detailed description of the terminology, e.g.
such as sensor value, setpoint, actual value etc., can be found under
The parameter window - Gx Light controller is visible when, in the
the additional function Light controller is parameterized for the lighting group. The additional function Light
controller is only available for the first eight lighting groups of the DLR/S. Lighting groups 9...16 can be
integrated into the controller by a master/slave assignment.
®
KNX devices, e.g.
Constant light control, page 171.
Parameter window Gx Group, page 67,
DLR/S 8.16.1M | 2CDC 507 100 D0202 99