Parameter Window Scene X - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.2.4.1

Parameter window Scene x

In the parameter window Scene x (x = 1, 2...14), the general settings for the light scenes are undertaken.
The parameter window Scene x is enabled if, in the
scene is enabled.
A scene value must be set in order to assign a lighting group to a scene. The scene value corresponds to
the brightness value, which the lighting group assumes when the scene is recalled.
Note
When the Staircase lighting function is enabled or an additional function (Light control or Slave) is
enabled, the reaction to a scene recall can be parameterized in the parameter window Gx: Control
Operating, Gx: Slave or Gx: Staircase lighting.
118 2CDC 507 100 D0202 | DLR/S 8.16.1M
Parameter window Scenes, page 117, the required