Parameter Window - Gx Slave - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.2.3.2.7

Parameter window - Gx Slave

The parameter window Gx Slave is enabled in the
Select additional function has been set to the option Slave.
When the Slave function is operational, the lighting group follows the brightness value provided by the
master via the communication object Brightness value of slave. The reaction to switch, dim or brightness
value telegrams can be parameterized individually.
With the Slave function, each individual lighting group of the DLR/S can be integrated into a constant light
control. The master can be in the DLR/S or another ABB i-bus
If, in the following section, the communication object Switch or Brightness value is mentioned, the details
apply for the communication objects Switch/Status or Brightness value/Status.
For further information see: Slave, page 190
112 2CDC 507 100 D0202 | DLR/S 8.16.1M
Parameter window Gx Group, page 67, if the parameter
®
device with master properties.