Parameter Window - Gx Staircase Lighting - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.2.3.2.4

Parameter window - Gx Staircase lighting

The parameter window - Gx Staircase lighting is enabled if, in the parameter window - Gx Functions, the
parameter Enable function staircase lighting is set with the option Yes.
The DLR/S features a Staircase lighting function, which can be triggered and stopped via individual switch
telegrams of the individual lighting groups. For each DLR/S, a staircase lighting sequence can be
parameterized, which can be set in the
Note
The Staircase lighting function is comprised of two scenes. The DLR/S automatically selects the internal
scenes 13 and 14 when the Staircase lighting function is selected. Scenes 13 and 14 can still be used
and can be recalled via the appropriate scene communication object. In this case, groups
parameterized with the Staircase lighting function are controlled with the switch-on brightness of the
Staircase lighting function.
For further information, see:
In the parameter window - Gx Staircase lighting, the reaction to various KNX telegrams such as brightness
value, relative dimming, recall scene and voltage recovery can be parameterized. The reaction to a switch
telegram is not explicitly programmable and reacts as follows:
The Staircase lighting function can be triggered by an ON telegram to the communication object Switch or
by activation of the Staircase lighting function of a lighting group. If there is an OFF telegram at the
communication object Switch, the lighting group is controlled with the basic brightness of the Staircase
lighting function. The Staircase lighting function is in standby mode and can be started by a renewed ON
telegram. If the staircase lighting is already at the switch-on value, the staircase lighting time is restarted
(retriggered).
The Staircase lighting function is also started if the lighting group receives a telegram with the value 1
(enabling the additional communication object in parameter window - Gx Functions) on the communication
object Activate stairc. light./Status.
94 2CDC 507 100 D0202 | DLR/S 8.16.1M
Parameter window
Staircase lighting, page 167
General, page 43.