Staircase Lighting - ABB i-bus KNX Product Manual


ABB i-bus KNX
Planning and application
4.1.5.1

Staircase lighting

The output switches off automatically after the staircase lighting time T
the time restarts (retrigger function), if the parameter Extending staircase lighting by multiple operation
("pumping up") is set to yes in the parameter window
This corresponds with the basic response of the function Staircase lighting, as long as a warning is not pa-
rameterized.
Warning
An additional warning function enables the user to be warned in good time before the staircase lighting
time elapses. It can be carried out by switching the output on/off briefly or by sending a communication ob-
ject.
The warning time T
switched on and off and/or the communication object Staircase lighting warning can be written with a value
1. The output is switched off briefly for the period T
the communication object Staircase lighting warning is sent. As a result, for example, half of the lighting is
switched off and a LED is switched on as a warning.
The entire staircase lighting time, in which the staircase lighting is on, corresponds with the time period T
plus T
extends the ON phase. At the start of the warning time, the output can be briefly
WARN
.
WARN
With each telegram with value 1,
ON.
A: Time, page 58, to no, not retriggerable.
, before the staircase lighting time T
WARN
SE/S 3.16.1 | 2CDC 505 084 D0203 129
elapses and
ON
ON