ABB i-bus KNX Product Manual page 119


ABB i-bus KNX
Commissioning
No.
99
This communication object is enabled if in parameter window
has been selected with the option yes.
The warning is sent with the parameterized value if threshold value 1 is exceeded or fallen below.
100
See Threshold value 1.
101
See Threshold value 1.
102
See Threshold value 1.
103
This communication object is enabled if in parameter window
object "Apparent power" has been selected with the option yes.
The value of the communication object is sent in VA on the bus.
105
This communication object is enabled if in parameter window
object "Power factor" has been selected with the option yes.
106
This communication object is enabled if in parameter window
object "Crest factor" has been selected with the option yes.
Function
Threshold 1 warning
Threshold 2 lower limit
Threshold 2 upper limit
Threshold 2 warning
Apparent power
Power factor
Crest factor
Object name
A: Voltage
A: Monitor voltage, page 86, the parameter Enable thresholds
A: Voltage
A: Voltage
A: Voltage
A: Apparent power
A: Instrument and power
A: Power factor
A: Instrument and power
A: Crest factor current
A: Instrument and power
Data type Flags
1 bit C, R, T
DPT 1.005
4 Byte C, R, W, T
DPT 14.027
4 Byte C, R, W, T
DPT 14.027
1 bit C, R, T
DPT 1.005
4 Byte C, R, T
DPT 14.056
values, page 77, the parameter Enable
4 Byte C, R, T
DPT 14.057
values, page 77, the parameter Enable
4 Byte C, R, T
DPT 14.057
values, page 77, the parameter Enable
SE/S 3.16.1 | 2CDC 505 084 D0203 117