ABB i-bus KNX Product Manual page 125


ABB i-bus KNX
Planning and application
Application examples
1. Parameterization:
Trigger 1 (Start) is activated by
At Trigger 1 (Start)
Reset "Intermediate meter"
At Trigger 1 (Start)
Send "Intermediate meter"
Trigger 2 is activated by
(trigger 2 is not used however)
The intermediate meter is sent, reset and restarted every time a telegram with the value 1 is re-
ceived on trigger 1 (1 bit).
2. Parameterization:
Trigger 1 (Start) is activated by
Trigger 2 is activated by
The intermediate meter records consumption every day from 8:00 to 16:00, then sends the meter
readings and continues to count the following day.
= 1 bit communication object
= yes
= yes
= 1 bit communication object
= Time (8:00)
= Time (16:00)
SE/S 3.16.1 | 2CDC 505 084 D0203 123