Switching On And Off Delay - ABB i-bus KNX Product Manual


ABB i-bus KNX
Planning and application
4.1.5.2

Switching ON and OFF delay

The switching ON and OFF delay delays switch on or switch off of the output.
The delay time T
switch telegram.
If a new ON telegram with the value 1 is received during the switch on delay, the time of the switch on de-
lay starts again. The same applies to switch off for the switch off delay. If a new OFF telegram with the
value 0 is received during the switch off delay, the time for the switch off delay starts again.
Note
If the device receives an OFF telegram during the switch on delay T
or T starts after a switch telegram, and after it has timed out, the output executes the
D1 D0
, an ON telegram is disregarded.
D1
SE/S 3.16.1 | 2CDC 505 084 D0203 131