Parameter Window A: Scenes 1 - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.2.5.2

Parameter window A: Scenes 1...6

In this parameter window, all settings for Scenes 1...6 are undertaken.
With the parameter Overwrite scene assignment with download or ETS reset in parameter window
A: Function, page 55, it is possible to not overwrite the scene values set via the bus during a download
and to protect them.
Assignment to scene number 1...64
Options:
With the function Scene, up to 64 different scenes are managed via a single group address. With this
group address, all slaves, who are integrated into a scene, are linked via a 1 byte communication object.
The following information is contained in a telegram:
•
Number of the scene (1...64) as well as
•
Telegram: recall scene or save scene.
The output can be integrated in up to 18 scenes. So for example, the scene can be switched on in the
morning and switched off in the evening, or the output can be integrated into light scenes.
66 2CDC 505 084 D0203 | SE/S 3.16.1
no assignment
Scene 1
...
Scene 64