Parameter Window Meter Reading Total (Wh) - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.2.3.1

Parameter window Meter reading total (Wh)

In parameter window Meter reading total, the settings for the Meter total and the Intermediate meter total
are undertaken.
Send "Meter reading total"
Send "Intermediate meter reading total"
Options:
The meter readings Meter total and Intermediate meter total are sent to suit parameterization. Setting of
the cycle time and enabling of the request object occurs in the parameter window
Furthermore, the readings of the Intermediate meter total are sent on the bus at starting and/or stopping.
Trigger 1 (Start) is activated by
Options:
•
1 bit object: The 1 bit communication object Receive trigger 1 (Intermediate meter total) is enabled.
The intermediate meter starts if a telegram with the value 1 is received on this communication object.
•
Time: The 3 byte communication object Trigger 1 change time (Intermediate meter total) is enabled.
The start time can be modified using this communication object. The following parameters appear:
38 2CDC 505 084 D0203 | SE/S 3.16.1
no, update only
cyclically
on request
cyclically and on request
1 bit object
Time
Metering (Wh), page 33.