ABB i-bus KNX Product Manual page 144


ABB i-bus KNX
Planning and application
Voltage, current, power, active power total, frequency (output A...C)
Behaviour with:
Value of the communica-
tion object
Values of the communica-
tion objects Threshold
value x
Values of the communica-
tion objects Threshold
value warning
Evaluation
142 2CDC 505 084 D0203 | SE/S 3.16.1
Bus voltage recovery Download
Is set to the value 0 and As with bus voltage
refreshed with the next recovery
transmission of the
measuring processor.
Are retained. A parameter decides
whether the values are
accepted.
Are sent after the first As with bus voltage
evaluation of the threshold recovery
with the current value, if
the corresponding value is
either larger than the upper
limit or less than the lower
limit, and the warning
should be sent.
The evaluation of the As with bus voltage
threshold values restart. recovery
The state of the hysteresis
is lost.
ETS reset Full download / applica-
tion update
As with bus voltage As with bus voltage
recovery recovery
As with download Parameterized values are
accepted.
As with bus voltage As with bus voltage
recovery recovery
As with bus voltage As with bus voltage
recovery recovery