ABB i-bus
KNX
Commissioning
Object "Deactivate load control" (slave)
at recovery of bus voltage
Options:
This parameter defines how the function Load control slave should behave after bus voltage recovery.
•
unchanged: The status of the function Load control slave is saved at bus voltage failure and restored
after bus voltage recovery.
•
0 = load control activated: The function Load control slave is active after bus voltage recovery.
•
1 = load control deactivated: The function Load control slave is not active after bus voltage recovery.
unchanged
0 = load control activated
1 = load control deactivated
SE/S 3.16.1 | 2CDC 505 084 D0203 91