ABB i-bus KNX Product Manual page 101


ABB i-bus KNX
Commissioning
No.
11
This communication object is enabled if in parameter window
object have been selected with the option yes.
The internal timer starts when a telegram with the value 1 is received on this communication object. If a telegram with the value
1 is received within 10 s after the start of the timer on the communication object Reset meter readings (communication object
no. 12), all main and intermediate meters are reset and stopped.
12
See communication object 11
Function
Enable reset meters
Note
All meter readings are lost and cannot be restored.
Important
The meters can only be reset when the measurement process is active, i.e. rated voltage is present on at
least one output.
Reset meter readings
Object name Data type
Meter reading 1 bit
DPT 1.003
Metering (Wh), page 33, the parameter All meters resettable via
Meter reading 1 bit
DPT 1.015
SE/S 3.16.1 | 2CDC 505 084 D0203 99
Flags
C, R, W
C, W