ABB i-bus KNX Product Manual page 64


ABB i-bus KNX
Commissioning
The following parameters appear at Switching ON and OFF delay:
The output can be switched on or off with a delay via this function. Explanations for the on and off delay
can be found at
ON and OFF telegrams in combination with ON and OFF delays can be found there.
Delay for switching ON
in s [0...65,535]
Options:
Here you set the time, by which an ON telegram is delayed after switch on.
Delay for switching OFF
in s [0...65,535]
Options:
Here you set the time, by which switch OFF is delayed after a switch OFF telegram.
62 2CDC 505 084 D0203 | SE/S 3.16.1
Switching ON and OFF delay, page 131. Also, a timing diagram and the effects of different
0...65,535
0...65,535