ABB i-bus KNX Product Manual page 107


ABB i-bus KNX
Commissioning
No.
34
This communication object is enabled if in parameter window
(Start) is activated by has been selected by the option Time.
The parameterized start time can be modified using this communication object.
If the parameterized start time is received via the communication object Time (communication object no. 8), the intermediate
meter starts. You can parameterize whether the intermediate readings are reset and/or sent.
35
This communication object is enabled if in parameter window
(Start) is activated by has been selected by the option 1 bit object.
The intermediate meter is sent if a telegram with the value 1 is received via this communication object. You can parameterize
whether the intermediate meter stops or continues to count when trigger 2 is received.
35
This communication object is enabled if in parameter window
(Start) is activated by has been selected by the option Time.
The parameterized start time can be modified using this communication object.
If the parameterized start time is received via the communication object Receive time (communication object no. 8), the
intermediate meter reading is sent. You can parameterize whether the intermediate meter stops or continues to count when
trigger 2 is received.
35
This communication object is enabled if in parameter window
(Start) is activated by has been selected by the option Limit.
The parameterized limit can be modified using this communication object.
If the parameterized limit is reached, the intermediate meter reading is sent and the intermediate meter stops.
35
This communication object is enabled if in parameter window
(Start) is activated by has been selected by the option Duration.
The parameterized duration can be modified using this communication object.
The intermediate meter reading is sent when the parameterized duration is reached. You can parameterize whether the
intermediate meter stops or continues to count when trigger 2 is received.
36
This communication object is enabled if in parameter window
meter reading total additionally resettable via object has been selected with the option yes.
The intermediate meter is reset if a telegram with the value 1 is received via this communication object.
Function
Trigger 1 change time
Receive trigger 2
Trigger 2 change time
Trigger 2 change limit
Trigger 2 change duration
Reset
Object name
Intermediate meter total
Meter reading total (Wh), page 38, the parameter Trigger 1
Intermediate meter total
Meter reading total (Wh), page 38, the parameter Trigger 2
Intermediate meter total
Meter reading total (Wh), page 38, the parameter Trigger 2
Intermediate meter total
Meter reading total (Wh), page 38, the parameter Trigger 2
Intermediate meter total
Meter reading total (Wh), page 38, the parameter Trigger 2
Intermediate meter total
Meter reading total (Wh), page 38, the parameter Intermediate
Data type Flags
3 byte DPT 10.001 C, R, W, T
1 bit C, W
DPT 1.017
3 byte C, R, W, T
DPT 10.001
4 byte C, R, W, T
DPT 13.010
2 byte C, R, W, T
DPT 7.006
1 Bit C, W
DPT 1.015
SE/S 3.16.1 | 2CDC 505 084 D0203 105