Parameter Window - Gx Slave - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.2.3.2.7

Parameter window - Gx Slave

The parameter window Gx Slave is enabled in
Select additional function has been set to the option Slave.
With operating function Slave, the lighting follows the brightness value provided by the master via the
communication object Brightness value of Slave. The reaction to switch, dim or brightness value telegrams
can be parameterized individually.
With the function Slave, each individual lighting group of the DLR/A can be integrated into a constant
lighting control. The master can be in the DLR/A or another ABB i-bus
If in the following, the communication object Switch or Brightness value is mentioned, the details apply for
the communication objects Switch/status or Brightness value/status.
For further information see: Slave, page 186
108 2CDC507128D0202 | DLR/A 4.8.1.1
Parameter window Gx Group, page 63, if the parameter
®
device with master properties.