Parameter Window - Gx Functions - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.2.3.2.3

Parameter window - Gx Functions

In this parameter window, additional functions of the output can be enabled.
The DLR/A has the option to make two additional communication objects available. These communication
objects are primarily intended for certain functions, which are not required in parallel. For this reason, the
user has a free selection of enabling two additional objects for their application.
The DLR/A does not check the plausibility of the parameterization. Accordingly, the same communication
object can be selected twice or a communication object, whose function is fully unsuited, e.g. the
communication object Warning staircase lighting, does not have a function without function stairc. light
activate/status.
Enable additional function 1
Enable additional function 2
Options:
With both these parameters, two additional communication objects can be enabled for the lighting group
that are useful for special applications.

no function: No additional communication object is enabled.

Enable burn-in lamps/status: The communication object Enable burn-in lamp/status is available for the
lighting group. Using this communication object, the burn-in of these individual lighting groups can be
initiated, and the status can be read or sent on the KNX. A prerequisite is that the function Burn-in is
selected in
under this parameter.
82 2CDC507128D0202 | DLR/A 4.8.1.1
no function
Enable burn-in lamps/status
Block
Staircase light. permanent ON
Warning staircase lighting
Stairc. light. activate/status
Parameter window Gx Group, page 63. The burn-in time must also be parameterized