Configuring Wimax Radio Parameters - Siemens RUGGEDCOM WiN5200 User Manual

RUGGEDCOM WiN5100/WiN5200
User Guide
Section 6.5.4

Configuring WiMAX Radio Parameters

On the Radio Settings pane, you can enable and disable WiMAX radio settings. After making changes on the
Radio Settings pane, you must reboot the CPE.
NOTE
Due to FCC regulations, this feature is not available for WCS 2.3GHz.
Procedure: Setting WiMAX Radio Parameters
1. Click the WiMAX button. The Scanner Settings pane appears.
In the options panel, click the Radio link. The Radio Settings pane appears.
2.
Figure 81: Radio Settings pane
3. Set the following WiMAX radio options:
Table: Radio Settings fields
Column
Maximum Tx Power Enhanced
Boost on CDMA Contention
After making changes, click the Apply button.
4.
5. After changing the Maximum Tx Power Enhanced or Boost on CDMA Contention fields, reboot the CPE:
a. Click the Management button. The System Functions pane appears.
Click the Reboot button. The CPE reboots.
b.
Configuring WiMAX Radio Parameters
Description
Displays the setting for transmission power enhancement. When On, transmission
power is enhanced. When Off, transmission power is not enhanced. The default setting
is Off.
Values: On | Off
Determines if transmission power is boosted on CDMA (Code Division Multiple
Accessbase) contention. When On, transmission power is boosted when another station
competes for the same bandwidth. When Off, transmission power is not boosted when
the CPE detects contention. The default value is Off.
Values: On | Off
Chapter 6
CPE Management Interface
93