Developer Mode; Ethernet Lock - Siemens RUGGEDCOM WiN5200 User Manual

Chapter 6
CPE Management Interface
Field
Local Time
4. Click the Apply button.
Section 6.2.12

Developer Mode

Use the Developer Mode pane to access Developer Mode.
Procedure: Accessing Developer Mode
1. Click the Management button. The Management options appear in the options pane.
2. In the options panel, click the Developer Mode link. The Developer Mode pane appears.
Figure 62: Developer Mode pane
3. In the Password field, type the password for Developer Mode. To obtain this password, contact Technical
Support.
The status of the password appears in the Status field. If the password is correct, the message "Correct
Password" appears in this field.
4. Click the Apply button.
Section 6.2.13

Ethernet Lock

If enabled, the Ethernet Lock function locks ethernet ports during certain events. The CPE will be automatically
locked during the following conditions:
• When Ethernet is down.
• During system start-up, with the following exceptions:
▪ A software exception – if the reason for the system reboot was a software exception, the CPE will not be
locked.
72
Description
Displays the local time advertised by the base station. The time appears automatically in this field, if set
in the base station.
RUGGEDCOM WiN5100/WiN5200
User Guide
Developer Mode