Table of Contents
Advertisement
Chapter 6
CPE Management Interface
Field
MAC Address
VLAN ID
Aging Time [sec]
Interface
5.
To remove an entry from the MAC address table, select a row in the table and click the Clear button.
6.
After changing the Aging time [300-1800] sec field, click the Apply button.
Section 6.3.2.3
MTU Configuration
On the MTU pane, you can enable or disable the maximum transmission unit. The MTU specifies the size of the
largest data unit, in bytes, that the Base Station will transmit. The MTU value includes the L2 header and cyclic
redundancy check (CRC).
Procedure: Enabling/Disabling MTU
1.
Click the Backbone button. The Backbone links appear in the options pane.
2.
In the options pane, click the MTU link. The MTU Configuration pane appears.
Figure 68: MTU Configuration pane
3.
Under Mini-jumbo frames support, select either Enable or Disable.
4.
Click the Apply button.
5.
Reboot the base station:
78
Description
Displays the MAC address of a local or remote node.
Displays the identifier for the Virtual LAN on which the node is active.
Displays the time, in seconds, until the entry will be removed from the table.
Displays the interface from which the CPE learned the MAC address.
Possible values include:
• Network — the base station acquired the address from the Ethernet network interface
• RF — the base station acquired the address from the RF interface
• Local — indicates the MAC address of the base station itself
RUGGEDCOM WiN5100/WiN5200
User Guide
MTU Configuration
- Quick Links:
- Connecting to and Logging in to...
Hide quick links:
Advertisement
Table of Contents
