Wall Mount Installation - Siemens RUGGEDCOM WiN5200 User Manual

RUGGEDCOM WiN5100/WiN5200
User Guide
NOTE
When mounting the antenna/enclosure to a 1"-1.75" pole, note the orientation of the clamping
bracket in the illustration.
Figure 13: Mounting the Antenna/Enclosure to a Pole
4. Adjust the position of the CPE unit. For more information about how to align the CPE Antenna, refer to
Section 4.9, "Aligning the CPE
5. Tighten the screws connecting the clamping bracket to the mounting bracket. Make sure the screws are
torqued to 14 Nm (10 ft. lb.).
Section 4.7

Wall Mount Installation

To following procedure describes how to mount the CPE unit to a wall.
Wall Mount Installation
Antenna".
Chapter 4
Installation Procedure
25