Ink Cartridge Codes; Ink Cartridge Handling Precautions - Epson WorkForce Pro WF-4720 series User Manual

User's Guide

Ink Cartridge Codes

The following are the codes for genuine Epson ink cartridges.
Icon BK: Black
Padlock 35
35XL
* "XL" indicates a large cartridge.
For Australia and New Zealand
BK: Black
802
*
802XL
* "XL" indicates a large cartridge.
Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of
non-genuine ink. The use of non-genuine ink may cause damage that is not covered by Epson's warranties, and
under certain circumstances, may cause erratic printer behavior. Information about non-genuine ink levels may
not be displayed.
Note:
❏ Not all cartridges are available in all regions.
❏ For users in Europe, visit the following website for information on Epson's ink cartridge yields.
http://www.epson.eu/pageyield
Related Information
"Technical Support Web Site" on page 222
&

Ink Cartridge Handling Precautions

Read the following instructions before replacing ink cartridges.
Handling precautions
❏ Store ink cartridges at normal room temperature and keep them away from direct sunlight.
❏ Epson recommends using the ink cartridge before the date printed on the package.
❏ For best results, use up ink cartridge within six months of opening the package.
❏ For best results, store ink cartridge packages with their bottom down.
❏ After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at
least three hours before using it.
Replacing Ink Cartridges and Other Consumables
C: Cyan
35
* *
35XL
C: Cyan
802
*
802XL
M: Magenta
35
*
35XL
M: Magenta
802
*
802XL
137
Y: Yellow
35
*
35XL
Y: Yellow
802
*
802XL