Sending A Fax From A Computer; Receiving Faxes; Setting Receive Mode - Epson WorkForce Pro WF-4720 series User Manual

User's Guide
Related Information
"Fax Settings" on page 128
&
Sending Different Size Documents Using ADF (ADF Continuous Scan)
If you place different sized originals in the ADF, all of the originals are sent at the largest size among them. You can
send them in their original sizes by sorting and placing them by size, or placing them one by one.
Before placing originals, make the following setting.
Tap Fax on the home screen, tap the Fax Settings tab, and then tap the ADF Continuous Scan box to set this to
On. Follow the on-screen instructions to place originals.
The printer stores the scanned documents, and sends as one document.
Note:
If you leave the printer untouched for 20 seconds after prompted to set the next originals, the printer stops storing and starts
sending the document.
Related Information
"Fax Settings" on page 128
&

Sending a Fax from a Computer

You can send faxes from the computer by using the FAX Utility and PC-FAX driver. See the help of FAX Utility and
PC-FAX driver for the operating instructions.
Related Information
"PC-FAX Driver (Fax Driver)" on page 167
&
"FAX Utility" on page 167
&

Receiving Faxes

Setting Receive Mode

You can set Receive Mode using the Fax Setting Wizard. When you set up the fax feature for the first time, we
recommend using the Fax Setting Wizard. If you want to change the Receive Mode settings individually, follow
the steps below.
1. Tap Settings on the home screen.
2. Tap General Settings > Fax Settings > Basic Settings > Receive Mode.
Faxing
120