Scanning By Touching Smart Devices To The Nfc Tag - Epson WorkForce Pro WF-4720 series User Manual

User's Guide
The following screens are subject to change without notice.
A
Home screen displayed when the application is started.
B
Displays information on how to setup the printer and a FAQ.
C
Displays the screen where you can select the printer and make printer settings. Once you have selected the
printer, you do not need to select it again from the next time.
D
Displays the scanning screen.
E
Displays the screen where you can make scan settings such as resolution.
F
Displays scanned images.
G
Starts scanning.
H
Displays the screen where you can save scanned data to a smart device or Cloud services.
I
Displays the screen where you can send scanned data by email.
J
Displays the screen where you can print scanned data.

Scanning by Touching Smart Devices to the NFC Tag

Even if your smart device does not make any settings to use the printer, you can automatically connect it and scan
by touching the NFC antenna of a smart device to the printer's NFC Tag.
Make sure that you prepare the followings to use this feature.
❏ Enable the NFC function on your smart device.
❏ Epson iPrint is installed on your smart device. If not, touch the NFC tag antenna of the smart device to the
printer's NFC Tag to install it.
Scanning
107