Fujitsu Arrows NX F-01J Instruction Manual page 131

◆ Multi-connection
Set whether to use Wi-Fi network and packet communication
(LTE/3G) simultaneously for the comfortable Internet
connection. When Multi-connection is set to ON, you can
download or stream various contents such as videos and
music with high-speed communication (High-speed
download/High-speed streaming).
･
Connect to Wi-Fi network with Wi-Fi ON in advance.→P126
･
A packet communication charge may be applied using
Multi-connection since it also uses packet communication
(LTE/3G). If you do not want to use packet communication,
turn off Multi-connection.
･
Multi-connection may not be available depending on the
application.
･
Depending on the connected Wi-Fi network, high-speed
communication may not be available.
1
From the Home screen,
& Bluetooth]→[Multi-connection]
2
Set [Multi-connection] to ON
･
If a caution screen appears, read the description and tap
[OK].
3
Set required items
･
Tap [Select mode] to select communication mode for
Multi-connection.
･
Register a Wi-Fi network in [Frequently used hotspot],
and the terminal will preferentially use Wi-Fi when you
are connected to the registered Wi-Fi network.
→[Settings]→[Wi-Fi
129
❖
About applications compatible with
Multi-connection
The application displayed by tapping [Select application] is the
Multi-connection target.
✔INFORMATION
･
When the running application is selected in [Select
application], enabling the setting may take time.
To enable the setting immediately, end the running
application and restart the terminal.
･
Some functions may be restricted when using Wi-Fi for the
site that distinguished network connection (dメニュー
(dmenu)→Items in "My docomo (お客様サポート)" (My
docomo (customer support)) etc.). In that case, turn off Wi-Fi
before use. On the website that does not support multi-
connection, you cannot see some part of a streaming movie.
In that case, turn off Multi-connection before use.
･
Multi-connection cannot be used in the following cases.
- In Airplane mode
- During international roaming
- Tethering in use
- VPN in connection
- Wi-Fi Direct/Miracast in connection
･
If the Wi-Fi network registered in [Frequently used hotspot]
behaves erratically, some applications that usually restrict
communications to Wi-Fi may temporarily switch over to
packet communications (LTE/3G).
･
When Multi-connection is set to OFF, high-speed download/
high-speed streaming also turns OFF.
･
If data amount exceeds the limit of subscribed budget plan
and transmission speed is limited, multi-connection does not
work.
Settings