Making/Receiving A Call In The Country You Stay - Fujitsu Arrows NX F-01J Instruction Manual

❖
Date & time
When [Automatic date & time]/[Automatic time zone] in [Date
& time] is marked, the date, time and time differences of the
terminal are corrected by receiving information related to time
and time differences from the network of overseas
telecommunications carrier you connect to.
･
Correction of the time or time differences may not be
performed correctly depending on the network of overseas
network operator. In that case, set time zone manually.
･
Timing of correction varies by the overseas network
operator.
･
"Date & time"→P155
❖
About inquiries
･
For loss or theft of the terminal or docomo nano UIM card,
immediately contact DOCOMO from the spot to take the
necessary steps for suspending the use. For inquiries, see
the last page of this manual. You can carry out the procedure
to suspend the use from My docomo. Note that you are still
liable for the call and communication charge incurred after
the loss or theft occurred.
･
For using from land-line phone, entering "International call
access code" or "Universal number international prefix" for
the country is needed.
Making/Receiving a call in the
country you stay
◆ Making a call to outside country you
stay (including Japan)
You can make a call from the country you stay to another
country using the international roaming service.
･
For details on available countries, network operators, etc.,
refer to NTT DOCOMO website.
1
From the Home screen,
2
[Dial]→+ (Touch and hold "0")→Enter "Country
code-Area code (City code) without leading 0
and phone number"
･
In some countries and areas such as Italy, "0" is
required.
･
To call an overseas WORLD WING user, enter "81"
(Japan) for the country code regardless of whether the
party is in or out of the country you stay.
3
Making a video call :
✔INFORMATION
･
For details about video call, see "Making a call/video call".→
P64
173
→[Video call]
Overseas use