Airplane Mode - Fujitsu Arrows NX F-01J Instruction Manual

❖
Easy settings for Wi-Fi tethering
Register Wi-Fi device supporting WPS.
･
Set Wi-Fi tethering to ON in advance.
1
From the Home screen,
communication/Airplane mode]→[Tethering]
→[Easy settings for Wi-Fi tethering]
2
[Push button system]/[PIN entry system]→Set
required items→On the registration screen,
[OK]
･
In case of push button method, press a dedicated button
on the Wi-Fi devices. In case of PIN entry method, enter
PIN code displayed on the Wi-Fi device and tap [OK].
❖
Bluetooth tethering
You can connect your Bluetooth devices to the Internet.
･
Up to 4 Bluetooth devices can be connected simultaneously.
･
You need to pair the Bluetooth devices with your terminal
beforehand.→P161
1
From the Home screen,
communication/Airplane mode]→[Tethering]
2
Set [Bluetooth tethering] to ON
✔INFORMATION
･
For settings of the Bluetooth device, refer to the operation
manual of the Bluetooth device.
→[Settings]→[Data
→[Settings]→[Data
134

◆ Airplane mode

When Airplane mode is set, wireless functions of the terminal
(phone, packet communication, Wi-Fi, Miracast, tethering,
Bluetooth function, FM transmitter) are disabled. Wi-Fi,
Miracast and Bluetooth function can be manually turned on in
Airplane mode.
1
From the Home screen,
communication/Airplane mode]
2
Set [Airplane mode] to ON
✔INFORMATION
By pressing and holding P, you can also enable/disable
･
Airplane mode from the phone options menu.
→[Settings]→[Data
Settings