Waterproofness/Dustproofness, Shock Resistance - Fujitsu Arrows NX F-01J Instruction Manual

Waterproofness/Dustproofness,
shock resistance
F-01J has a waterproof equivalent to IPX5
well as a dustproof property equivalent to IP6X
condition that the slot cap is securely attached. Also, the
terminal comprises the shock resistant structure which
*4
passed the test in accordance with United States Military
Standard.
*1
IPX5 means that a phone keeps functioning after applying a jet
flow of 12.5 L/min. from every direction from a distance of
approximately 3 m for at least 3 minutes using water nozzle in 6.3
mm inner diameter.
*2 For F-01J, IPX8 means that a phone keeps functioning after F-01J
is slowly submerged to depth of 1.5 m in static tap water at room
temperature, left there for 30 minutes and then taken out (Camera
function cannot be used under water).
*3
IP6X, a degree of protection, indicates that the terminal can
maintain its functionality to prevent dust particles from entering
into the terminal even when it has been shaken for 8 hours in an
apparatus containing dust particles 75 μm or less in diameter.
*4 Our drop test which is in accordance with MIL-STD-810G w/
Change1 Method 516.7-Shock established by the USA
Department of Defense is implemented.
Waterpro Immersion
ofness
Wind and
rain
*1
and IPX8
*3
on the
Immersion test at the depth of 1.5
meters for 30 minutes
Rain test with wind speed of 18 m/s
for 30 minutes
Dustproofness
Shock resistance
*2
, as
Vibrating resistance
Solar radiation
resistance
Dampproofness
Thermal Operation at
durability high
temperature
Storage at
high
temperature
Operation at
low
temperature
Storage at
low
temperature
Low Storage at
pressure low pressure
durability
Operation at
low
temperature
24
Dust test for 6 hours consecutively
(dust concentration of 10±7 g/m
wind speed of 8.9 m/s)
Drop test from 1.22 meters height
to plywood (lauan) in 26 directions
Vibration test for 3 hours (1 hour
each in 3 directions)
Solar radiation test for 24 hours
consecutively (total 1,120 W/m
High humidity test for 10 days
consecutively (95% of humidity, 30
- 60℃)
Operation environment : High
temperature test at 60℃
Storage environment : High
temperature test at 70℃
Operation environment : Low
temperature test at -20℃
Storage environment : Low
temperature test at -30℃
Low pressure test for 1 hour
consecutively (57.11 kPa/Approx.
4,572 m)
Low pressure test for 1 hour
consecutively (57.11 kPa/Approx.
4,572 m)
Contents/Precautions
3
,
2
)