Cellular Networks - Fujitsu ARROWS NX F-01K Instruction Manual

Cellular networks

Disable data communication or add an access point.
◆ Stopping the packet communication
Some applications automatically perform packet
communications. Packet communication is kept active unless
you disconnect it or the time-out error occurs. Enable/disable
packet communication as required.
1
From the Home screen,
[Wireless & networks]→[More]→[Cellular
networks]
2
Turn [Data enabled] to OFF
3
Confirm the content and [OK]
◆ Setting access point (APN)
The access point for accessing the Internet (sp-mode) is
registered by default and you can add or change it if necessary.
For details of sp-mode, refer to NTT DOCOMO website.
https://www.nttdocomo.co.jp/service/spmode/ (in Japanese
only)
For using mopera U, Business mopera Internet add the access
point manually.
For details on mopera U, refer to mopera U website.
https://www.mopera.net/ (In Japanese only)
･
When the tethering function is enabled, setting access point
is not available.→P133
→[Settings]→
136
❖
Checking the access point in use
1
From the Home screen,
[Wireless & networks]→[More]→[Cellular
networks]→[Access Point Names]
❖
Adding an access point
･
Do not change the MCC/MNC to other than 440/10. The
setting disappears from the screen.
1
From the Home screen,
[Wireless & networks]→[More]→[Cellular
networks]→[Access Point Names]
2
[＋]
3
[Name]→Enter a network profile→[OK]
4
[APN]→Enter an access point name→[OK]
5
Enter other items required by network
operator→[MENU]→[SAVE]
✔INFORMATION
･
If you have changed MCC/MNC settings and they do not
appear on the screen, reset to default or set the access point
manually.
→[Settings]→
→[Settings]→
Settings