◆ Updating software
・
Depending on update, installation may not be reserved and
you need to execute the installation by yourself. Open the
Notification panel→Tap a notification→Tap [Install].
■ Changing the automatic download setting
1
From the Home screen,
[System]→[About phone]→[Software Update]
→Tap the [Auto download/Auto upgrade]
button and set to ON/OFF
・
When [Auto download/Auto upgrade] is OFF, perform
the operation which is described in "When the icon does
not appear in the status bar" (→P198).
■ When the icon is not displayed on the status bar
Perform the update by the following operations.
1
From the Home screen,
[System]→[About phone]→[Software Update]
→[Update now]
Downloading starts.
2
When the message to start the installation
appears, tap [OK]/[Install]
・
Depending on the update contents, the confirmation
screen about updating appears after tapping [Update
now].
・
When the confirmation screen appears, follow the
procedure below.
→[Settings]→
→[Settings]→
198
a Select an upgrade method
Perform now (only via Wi-Fi) : Immediately download
the update file via Wi-Fi connection.
Perform at scheduled time (via Wi-Fi/Xi) : Download
the update file via Wi-Fi connection or Xi/FOMA
time that is reserved automatically.
* If download via Xi/FOMA is not available, [Perform
at scheduled time (only via Wi-Fi)] appears. When
the sp-mode is not set, the update cannot be per-
formed by tapping [Perform at scheduled time (only
via Wi-Fi)]. Use Wi-Fi.
b Select operation
Download and Install : After downloading is complete,
the installation starts automatically. If you do not tap
[OK], the installation starts 10 seconds later.
Download : When downloading of the update file is
complete, the installation will not start automatically.
To install, you need to implement the installation
yourself.
✔INFORMATION
・
When the latest software is applied to the terminal, "No
upgrade is needed. Use it as it is." appears.
・
If downloading stops on the way, already downloaded data is
retained for up to 14 days. To resume downloading, resume
from
(Download stopped) on the notification panel.
・
When [Perform at scheduled time (Wi-Fi/Xi)] is selected, time
for download is automatically set. Changing start time is
unavailable. If you do not want to download at the
automatically set time, tap [Software Update]→[Back] and
then tap [Perform now (only via Wi-Fi)] to download the
update file.
*
at the
Appendix/Index