Microsd Card - Fujitsu ARROWS NX F-01K Instruction Manual

d Check that the display side of the terminal faces up and
then horizontally insert the slot cap in the direction of the
arrow straight
e Firmly press the slot cap to close→P26
■ Removing
a Face the display side of the terminal up, put your fingertip
into the groove and then open the slot cap→P26
b Draw the slot cap in the direction of the arrow straight and
horizontally→P32
c Remove the docomo nano UIM card from the slot cap
d Check that the display side of the terminal faces up and
then insert the slot cap in the direction of the arrow
straight and horizontally→P33
e Firmly press the slot cap to close→P26
✔INFORMATION
･
When handling docomo nano UIM card, take care not to
touch or scratch the IC. Also, be aware that trying to insert or
remove the docomo nano UIM card using excessive force
may cause it to break.
･
For drawing/inserting the slot cap from/into the slot, do not
draw or insert forcibly. Doing so may damage the slot cap.
◆ Security code for the docomo nano
UIM card
You can set up a security code called a PIN code for the
docomo nano UIM card.→P149

microSD card

Save the data of the terminal to a microSD card or import the
data of a microSD card to the terminal.
◆ microSD card
･
The terminal supports microSD card of up to 2GB,
microSDHC card and microSDHC UHS-I card of up to 32GB,
microSDXC card and microSDXC UHS-I card of up to 256GB
(as of November, 2017).
･
Note that DOCOMO does not guarantee actual operations of
all microSD cards. For information on compatible microSD
cards, contact manufacturers of microSD cards.
･
Do not power off the terminal while loading microSD card or
editing the data of microSD card. Doing so may break the
data or may affect operation of microSD card.
33
Before using the terminal