Fujitsu ARROWS NX F-01K Instruction Manual page 184

2
[Data roaming]→Check the contents on the
Attention screen, [OK]
❖
Setting Network operators
By default, the terminal is set to automatically search and
switch to an available network. To switch network manually,
perform the following operations.
1
From the Home screen,
[Wireless & networks]→[More]→[Cellular
networks]→[Network operators]
Available networks are searched for and displayed.
･
When a message notifying that the network search is
not available, confirm the content and tap [OK].
2
Select a network of the network operator
✔INFORMATION
･
To switch networks automatically, from the Home screen,
→[Settings]→[Wireless & networks]→[More]→[Cellular
networks]→[Network operators]→Tap [Select
automatically].
❖
Setting Network Mode
1
From the Home screen,
[Wireless & networks]→[More]→[Cellular
networks]→[Network Mode]
2
[4G/3G/GSM (Auto)]/[3G/GSM]/[GSM]
→[Settings]→
→[Settings]→
182
✔INFORMATION
･
To set network mode automatically, from the Home screen,
→[Settings]→[Wireless & networks]→[More]→[Cellular
networks]→[Network operators]→Tap [4G/3G/GSM(Auto)].
❖
Date & time
When [Automatic date & time]/[Automatic time zone] in [Date
& time] is marked, the date, time and time differences of the
terminal are corrected by receiving information related to time
and time differences from the network of overseas
telecommunications carrier you connect to.
･
Correction of the time or time differences may not be
performed correctly depending on the network of overseas
network operator. In that case, set time zone manually.
･
Timing of correction varies by the overseas network
operator.
･
"Date & time"→P166
❖
About inquiries
･
For loss or theft of the terminal or docomo nano UIM card,
immediately contact DOCOMO from the spot to take the
necessary steps for suspending the use. For inquiries, see
the last page of this manual. You can carry out the procedure
to suspend the use from My docomo. Note that you are still
liable for the call and communication charge incurred after
the loss or theft occurred.
･
For using from land-line phone, entering "International call
access number" or "Universal number international prefix"
for the country is needed.
Overseas use