Setup; Greasing The Machine; Replacing The Warning Decal - Toro Groundsmaster 4000 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
Media and Additional Parts
Description
Operator's Manual
Engine owner's manual
Parts Catalog
Operator training materials
Declaration of Conformity
Note:
Determine the left and right sides of the
machine from the normal operating position.
1

Greasing the Machine

No Parts Required
Procedure
Before you operate the machine, grease it to ensure
proper lubricating characteristics; refer to
the Bearings and Bushings (page
properly grease the machine will result in premature
failure of critical parts.
Description
No parts required
Warning decal
Greasing
57). Failure to
Qty.
–
1
Qty.
1 Review before operating the machine.
1
Use to reference engine information.
1 Use to reference part numbers.
1 Review before operating the machine.
1
2
Replacing the Warning
Decal
For CE Models Only
Parts needed for this procedure:
1 Warning decal
Procedure
On machines requiring European CE compliance,
replace the warning decal Part No. 117-2754 with the
warning decal Part No. 117-2766.
15
Use
Grease the machine.
Replace the warning decal.
Use