Toro Groundsmaster 4000 Operator's Manual page 6

104-3578
1. Height-of-cut adjustment
104-3579
1. Low height-of-cut
adjustment
100-6578
1. Entanglement hazard, belt—do not operate the machine
with the shields or guards removed; always keep the shields
and guards in place; stay away from moving parts.
106-6754
1. Warning—do not touch the hot surface.
2. Cutting/dismemberment hazard, fan and entanglement
hazard, belt—stay away from moving parts.
decal104-3578
decal104-3579
2. High height-of-cut
adjustment
decal100-6578
decal106-6754
1. Engine coolant under
pressure.
2. Explosion hazard—read
the Operator's Manual.
1. Read the Operator's Manual for information on starting the
engine—1) Set to neutral; 2) Engage the brake; 3) Set the
engine speed to slow; 4) Turn the ignition key to preheat; 5)
Turn the ignition key to start the engine.
2. Read the Operator's Manual for information on shutting of
the engine—1) Set the engine speed to slow; 2) Disengage
the deck; 3) Lock the parking brake; 4) Wait 5 minutes; 5)
Turn the ignition key to shut off engine; 6) Remove the key
from the ignition.
3. Read the Operator's Manual.
4. Pull the knob out to engage the PTO.
5. Push the knob in to disengage the PTO.
6. Raise the decks to go to H range.
6
106-6755
3. Warning—do not touch the
hot surface.
4. Warning—read the
Operator's Manual.
114-0846
117-2718
decal106-6755
decal114-0846
decal117-2718