Toro Groundsmaster 4000 Operator's Manual page 22

Figure 10
2. In the S M
ETTINGS
scroll down to the P
the right button (Figure
Figure 11
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 11B and Figure
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure 11D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
, use the center button to
ENU
M and press
ROTECTED ENU
11A).
11C). Repeat this step
Note:
Rotate the key switch to the O
then to the O
N
You have the ability to view and change the settings in
the Protected Menu. Once you access the Protected
Menu, scroll down to Protect Settings option. Use the
right button to change the setting. Setting the Protect
Settings to O
FF
settings in the Protected Menu without entering the
PIN code. Setting the Protect Settings to O
protected options and requires you to enter the PIN
g028523
code to change the setting in the Protected Menu.
After you set the PIN code, rotate the key switch O
and back to the O
feature.
Setting the Auto Idle
•
In the Settings Menu, scroll down to Auto Idle.
•
Press the right button to change the auto idle time
between Off, 8S, 10S, 15S, 20S, and 30S.
Setting the Maximum Allowed
Mow Speed
•
In the Settings Menu, Scroll down to Mow Speed
and press the right button.
•
Use the right button to increase the max full mow
speed (50%, 75%, or 100%).
•
Use the center button to decrease the max full
mow speed (50%, 75%, or 100%).
•
Press the left button to exit.
Setting the Maximum Allowed
Transport Speed
g028522
•
In the Settings Menu, scroll down to Transport
Speed and press the right button.
•
Use the right button to increase the max transport
speed (50%, 75%, or 100%).
•
Use the center button to decrease the max
transport speed (50%, 75%, or 100%).
•
Press the left button to exit.
When finished with the Protected Menu, press the left
button to exit to the Main Menu, then press the left
button to exit to the Run Menu.
22
position locks the protected menu.
allows you to view and change the
position to enable and save this
N
position and
FF
hides the
N
FF